Search This Blog

Tuesday, December 30, 2008

create a folder without any name

Do you know, how can create a folder without any name!?
When you create or rename a folder do following:
press "Alt" and type 255 and then press Enter.
be successful !
or
"Alt" and "0160"

Airtel Secret Codes

Dial *123# to see your credit balance.

Dial *109*9898631902# to display the call cost after each call.

Vodafone code

To send an sms to a fax machine (vodafone) put 9741 then the fax no then send. You'll get a confirmation text about 5 mins later.

If you key *#104# and press call you will get a number beginning with 44 replace that 44 with 0 then dial the rest of that number into any phone - it's a direct line to your voicemail you can even divert calls to it.

Get through to customer services free by dialling 1611.
For Vodafone UK users, if you press *#105# then call you can check the status of when your account was last updated.

To know where the nearest transmitter in your area, press *#102# and call.If not works try *#105# (Vodafone).

Type *#147# to display the last number that called with the time and date of the call aswell when phone was on/off..

On portuguese Vodafone call 1799 to receive a message with your credit balance, call *#100# to the same thing call *#102# to see your last call

*#103# gives you the time and date

Vodafone, quick scratch card top-up, type *#1345*topupcardnumber# and you will see your new balance on your display! If you press *#1345# you can see your balance on screen.

Type *#31# / *#30# / or *#102# to get the price duration and number of your last call.

Cell broadcast: 050 to display local area code and postcode.

Free voicemailing! Call 70612 and enter your phone number and voice mail password.

GSM Mobiles Secret Codes

GSM Secret Codes
Type *#61# and press call - Check redirection status.
Cancel all redirections: ##002#
*43# to activate call waiting, to deactivate #43#.
If your phone doesn't have incoming call barring and outgoing call barring, you can try this.

For outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial #33#barcode*#.

On any phone on any network type in **43# to enable conference calls. You can make up to 7 calls at once

If you need to block SMS reception (if you are spammed by someone) just press this code:
*35*xxxx*16#
xxxx is your Call Barring code (default is 0000).
To remove this barring type:
#35*xxxx#

If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call.
(*#30# / *#31# or *31# / #31# ) Works on some networks.

Typing *0# or *nm# on the beginning of a txt message gives you detailed delivery report on some networks.. But turn off reports in message settings before.

When the sim card-pin blocked type **042*pin2 old*newpin2*newpin2*

nokia 1110,6030 LIGHT problem in mobile


Activation Wizard

Use the Activation Wizard
If you have only a few volume licensing product keys to change, you can use the Activation Wizard.

Warning!
This document contains instructions for editing the registry. If you make any error while editing the registry, you can potentially cause Windows to fail or be unable to boot, requiring you to reinstall Windows. Edit the registry at your own risk. Always back up the registry before making any changes. If you do not feel comfortable editing the registry, do not attempt these instructions. Instead, seek the help of a trained computer specialist.
Note: Microsoft recommends that you run System Restore to create a new restore point before you complete the following steps:
1. Click Start, and then click Run.
2. In the Open box, type Regedit, and then click OK.
3. In the left pane, locate and then click the following registry key:

4. In the right pane, right-click OOBETimer, and then click Modify.
5. Change at least one digit of this value to deactivate Windows.
6. Click Start, and then click Run.
7. In the Open box, type the following command, and then click OK.

8. Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.
9. Click Change Product key.
10. Type the new product key in the New key boxes, and then click Update. If you are returned to the previous window, click Remind me later, and then restart the computer.
11. Repeat steps 6 and 7 to verify that Windows is activated. You receive the following message:
Windows is already activated. Click OK to exit.
12. Click OK.
13. Install SP1 for Windows XP.
If you cannot restart Windows after you install SP1, press F8 when you restart the computer, select Last Known Good Configuration, and then repeat this procedure.
Risk is yours.

new

MS DOS COMMANDS
attrib
Change or view the attributes of one or more files. It defaults to displaying the attributes of all files in the current directory.
Options:
 To add an attribute attach a '+' in front of it.
 To remove an attribute attach a '-' in front of it
 Attributes include
 A - Archived (used mainly by file archiving software)
 H - Hidden
 S - System
 R - Read-only
attrib [+|-ahrs] [filespec]
Roughly equivalent to the Unix command chmod. In Linux, the command chattr also performs similar functions.
cd or chdir
Change current directory.
cd directory
Equivalent to the Unix command cd (with parameters), or pwd (without parameters). (cd .. descends a directory.)
chkdsk
Verifies a hard disk or a floppy disk for file system integrity.
Options:
 /F : Fixes errors on the disk
 /V : Displays the full path and name of every file on the disk
chkdsk drive [[path]filename] [/F] [/V]
Equivalent to the Unix command fsck
cls
Clears the screen.
cls
Equivalent to the Unix command clear.
copy
Copies files from one location to another. The destination defaults to the current directory. If multiple source files are indicated, the destination must be a directory, or an error will result.
copy filespec [destination]
Equivalent to the Unix command cp.
Files may be copied to devices (e.g. "copy file lpt1" would send the file to the printer on lpt1. "copy file con" would output to screen, which would be the same as type.
copy device
copy device filename
In this usage, data is written from the given device to the file until the end-of-file character (ASCII character 26, which may be typed as ctrl-Z) is encountered. The most commonly used device is named con, which is short for "console"; thus, copy con filename would allow the user to type directly into a file, and press ctrl-Z when finished.
In Unix, this functionality is provided by the cat command. cat > filename (with ctrl+D to finish) would be equivalent to the DOS command copy con filename.
defrag
Defragments disk drive
defrag driveletter
No Unix equivalent.
del or erase
Deletes files.
del filename erase filename
To delete files in Quiet mode
del /Q filename
Equivalent to the Unix command rm.
deltree
Deletes a directory along with all of the files and subdirectories that it contains. Normally, it will ask for confirmation of such a drastic action.
deltree [/y] directory
The /y parameter if present tells the deltree command to carry out without first prompting for confirmation. The deltree command is not included in recent Microsoft Windows operating systems. Deleting a non-empty directory in those versions of Windows where the command is not included, can be achieved by the use of the rmdir command as in the following example:
rmdir /s directory
In Unix, the functionality of deltree is provided by the rm command with the parameter -r (or -rf for the /y switch).
dir
Main article: Dir (DOS Command)
Displays contents of a directory.
Options :
 /w : Wide list format
 /p : Pause at every page
 /s : Also look in subdirectories
 /a[xx] : Display files with the specified attributes only
 /o[xx] : Modifies sort order
dir [options] [filespec]
Equivalent to the Unix command ls (the option -l is "long" list format, it works the opposite way from /w.)
echo
Prints its own arguments back out to the DOS equivalent of the standard output stream. Usually, this means directly to the screen, but the output of echo can be redirected like any other command. Often used in batch files to print text out to the user.
echo this is text Outputs 'this is text' echo.
Outputs a blank line
Another important use of the echo command is to toggle echoing of commands on and off in batch files.
echo on turns on echoing of commands echo off
turns off echoing of commands
Traditionally batch files begin with the ;@echo off statement. This says to the interpreter that echoing of commands should be off during the whole execution of the batch file thus resulting in a "tidier" output. The ;@ symbol declares that this particular command (echo off) should also be executed without echo. For example the following 2 batch files are equivalent:
Batch1.bat:
;@echo off echo The files in your root directory: dir /b /a-d c:\
Batch2.bat:
;@echo The files in your root directory: @dir /b /a-d c:\
Echo can be used to write to files directly from the console, by redirecting the output stream:
echo text > filename
Echo can also be used to append to files directly from the console, again by redirecting the output stream:
echo text >> filename
To type more than one line from the console into a file, use copy con (above).
Equivalent to the Unix command echo.
exit
Exits the current batch script or the controlling thread. When running from Windows this will close the command prompt.
EXIT [/B] [exitcode] /B
Exit the current batch script and set ERRORLEVEL to exitcode
Without this option, the controlling thread and any intermediate
batch files are immediately exited, and the process return code
is set to exitcode.
find
A filter to find lines in the input data stream that contain or don't contain a specified string and send these to the output data stream.
Find may also be used as a pipe.
find "keyword" < ''inputfilename'' > ''outputfilename''
Searches for a text string in a file or files.
FIND [/V] [/C] [/N] [/I] "string" [[drive:][path]filename[ ...]]
/V Displays all lines NOT containing the specified string.
/C Displays only the count of lines containing the string.
/N Displays line numbers with the displayed lines.
/I Ignores the case of characters when searching for the string.
"string" Specifies the text string to find.
[drive:][path]filename Specifies a file or files to search.
If a pathname is not specified, FIND searches the text typed at the prompt or piped from another command.
Equivalent to the Unix command grep. The Unix command find performs an entirely different function; see tree.
format
Delete all the files on the disk and reformat it for MS-DOS
In most cases, this should only be used on floppy drives or other removable media. This command can potentially erase everything on a computer's hard disk.
/autotest and /backup is an undocumented feature. Adding it formats the drive without a confirmation prompt.
format [options] drive FORMAT drive: [/V[:label]] [/Q] [/F:size] [/B | /S] [/C] FORMAT drive: [/V[:label]]
[/Q] [/T:tracks /N:sectors] [/B | /S] [/C] FORMAT drive: [/V[:label]] [/Q] [/1] [/4] [/B | /S] [/C] FORMAT drive:
[/Q] [/1] [/4] [/8] [/B | /S] [/C] /V[:label] Specifies the volume label. /Q Performs a quick format.
/F:size Specifies the size of the floppy disk to format (such as 160, 180, 320, 360, 720, 1.2, 1.44, 2.88).
/B Allocates space on the formatted disk for system files. /S Copies system files to the formatted disk.
/T:tracks Specifies the number of tracks per disk side. /N:sectors Specifies the number of sectors per track.
/1 Formats a single side of a floppy disk.
/4 Formats a 5.25-inch 360K floppy disk in a high-density drive.
/8 Formats eight sectors per track.
/C Tests clusters that are currently marked "bad."
Known as a joke among UNIX users of that time since every user on the machine could easily cause damage with just one command. Therefore, it was known in the UNIX community as "The big DOS time saver".
Equivalent to the Unix command mkfs.
help
Gives help about DOS.
help 'command' would give help on a specific command, in MS-DOS 6 a HELP program was started which would give more details and examples, earlier versions basically gave the same information as command/? would give.
Partialy equivalent to the Unix command man.
InterLnk
MS-DOS 6 and above command to network PCs using a null modem cable or LapLink cable. InterLnk is the client-side program (InterSvr is the server) which mapped the drives of the machine running InterSvr to the local machine.
No Unix equivalent.
InterSvr
MS-DOS 6 and above command used to network PCs using a null modem cable or LapLink cable. The server-side version of InterLnk, it also immobilizes the machine it's running on as it's an active app (As opposed to a TSR) which must be running for any transfer to take place.
No Unix equivalent.
label
Changes the label on a logical drive, such as a hard disk partition or a floppy disk.
md or mkdir
Makes a new directory. The parent of the directory specified must already exist.
md directory
Equivalent to the Unix command mkdir.
mem
Displays memory usage.
mem
Equivalent to the Unix command free.
memmaker
Starting from version 6, MS-DOS included the external program MemMaker which was used to free system memory (especially Conventional memory) by automatically reconfiguring Autoexec.bat and Config.sys files. This was usually done by moving TSR Programs to the Upper memory. The whole process required 3 system restarts. Before the first restart the user was asked wether he wanted to enable EMS Memory or not.
The use of MemMaker was popular among gamers who wanted to enable or disable Expanded memory in order to run a game which required EMS or not. The result would however not be as good as someone changing the settings them self.
Options :
 /BATCH Runs MemMaker in batch (unattended) mode. In batch mode, MemMaker takes the default action at all prompts.
 /UNDO Instructs MemMaker to undo its most recent changes.
more
Pages through the output so that you can view more than one screen of text.
command | more
Equivalent to the Unix commands more and less.
More may also be used as a filter.
more < inputfilename
move
Moves or renames a file.
move filename newfilename
Equivalent to the Unix command mv.
msd
Microsoft Diagnostics
Provides detailed technical information about the computer's hardware and software.
msd
No Unix Equvivalent, however in GNU/Linux similair type of information may be obtained from various text files in /proc directory.
pcpark
Parks the hard disk(s) (stops their turning) in order to enable safe shutdown; only used on early versions.
pcpark
No Unix equivalent.
rd or rmdir
Remove a directory, which must be empty of files.
rd directory
Equivalent to the Unix command rmdir.
rem
Remark statement, normally used within a batch file. However on the command line, rem can also be used to create a zero length file by redirecting an empty remark statement to a filename.
rem > newfilename
An alternative way to not run a specific statement in a batch file is creating a label that will never be used, ::.
In Unix, the # sign can be used to start a comment; the zero-length file can be achieved using various methods, such as the touch command or dd.
ren
Renames a file. Unlike the move command, this command cannot be used to rename subdirectories, or rename files across drives.
ren filename newname
A more useful function of this command is to mass rename files by the use of wildcards. For example, the following command will change the extension of all files in the current directory from htm to html:
ren *.htm *.html
In Unix, this functionality of a simple move is provided by the mv command, but changing extension of all files is not as simple.
scandisk
Disk diagnostic utility
scandisk driveletter
Scandisk is a replacement for the chkdsk utility. Its primary advantages over chkdsk is that it is more reliable and has the ability to run a surface scan which checks and marks bad sectors on the disk.
Equivalent to the Unix command fsck.
set
Sets environmental variables. See Environment variable.
sort
A filter to sort lines in the input data stream and send them to the output data stream.
sort < inputfilename > outputfilename
Equivalent to the Unix command sort.
time and date
Set/display the date and time
date time
Equivalent to the Unix command date with the important difference that calling this from the command line or a bat script will cause the program to halt requesting a new time until RETURN is pressed. The command 'time /t' will bypass this set feature.
tree
Shows the directory tree of the current directory
Options:
/F (Displays the names of the files in each folder.)
/A (Use ASCII instead of the extended characters.)
tree [options] [directory]
Equivalent to the Unix command find.
truename
truename filename
Outputs the entire path (full directory and filename) of a file. For example, if the working drive and directory were C:\PROGRAMS and one typed truename fish, the output would be C:\PROGRAMS\FISH.
This command was rarely, if ever, documented in DOS manuals.
This command is similar to the Unix which command, which, given an executable found in $PATH, would give a full path and name. The C library function realpath performs this function.
type
Display a file. The more command is frequently used in conjunction with this command, e.g. type long-text-file | more.
type filename
Equivalent to the Unix command cat.
undelete
Restores file previously deleted with del. By default all recoverable files in the working directory are restored. The options are used to change this behaviour. If the MS-DOS mirror TSR program is used, then deletion tracking files are created and can be used by undelete.
Options :
 /list : lists the files that can be undeleted.
 /all : Recovers all deleted files without prompting. Uses a number sign for missing first character.
 /dos : Recover only MS-DOS aware files, ignore deletion tracking file.
 /dt : Recover only deletion tracking file aware files.
undelete [filespec] [/list|/all][/dos|/dt]
ver
Shows the version of MS-DOS you are using.
Some versions of MS-DOS support an undocumented /r switch, which will show the revision as well as the version.
ver [/r]
Equivalent to the Unix command uname. However, in Linux uname may simply refer to the version of the kernel rather than the operating system itself, which is sometimes stored in a text file in /etc/name_version, or command lsb_release -a.
xcopy
Copy entire directory trees.
xcopy directory [destination-directory] Copies files and directory trees.
XCOPY source [destination] [/A | /M] [/D[:date]] [/P] [/S [/E]] [/W]
[/C] [/I] [/Q] [/F] [/L] [/H] [/R] [/T] [/U][/K] [/N]
source Specifies the file(s) to copy.
destination Specifies the location and/or name of new files.
/A Copies files with the archive attribute set,
doesn't change the attribute.
/M Copies files with the archive attribute set,
turns off the archive attribute.
/D:date Copies files changed on or after the specified date.
If no date is given, copies only those files whose
source time is newer than the destination time.
/P Prompts you before creating each destination file.
/S Copies directories and subdirectories except empty ones.
/E Copies directories and subdirectories, including empty ones.
Same as /S /E. May be used to modify /T.
/W Prompts you to press a key before copying.
/C Continues copying even if errors occur.
/I If destination does not exist and copying more than one file,
assumes that destination must be a directory.
/Q Does not display file names while copying.
/F Displays full source and destination file names while copying.
/L Displays files that would be copied.
/H Copies hidden and system files also.
/R Overwrites read-only files.
/T Creates directory structure, but does not copy files. Does not
include empty directories or subdirectories.
/T /E includes empty directories and subdirectories.
/U Updates the files that already exist in destination.
/K Copies attributes. Normal Xcopy will reset read-only attributes.
/Y Overwrites existing files without prompting.
/-Y Prompts you before overwriting existing files.
/N Copy using the generated short names.

Friday, December 19, 2008

" DEEPAK KUMAR VERMA KHAJUWALA"

DEEPAK KUMAR VERMA KHAJUWALA

CON. +919982806397 / +919928882791

e.mail = deepu_verma2009@rediffmail.com

sandhu Electronics khajuwala


DEEPAK VERMA

Tuesday, December 9, 2008






View My Stats
To disable the Windows key, do the following steps:
1. Click Start, click Run, type regedt32, and then click OK.
2. On the Windows menu, click HKEY_LOCAL_ MACHINE on Local Machine.
3. Click the System\CurrentControlSet\Control folder, and then double-click the Keyboard Layout folder.
4. On the Edit menu, click Add Value, type in Scancode Map, click REG_BINARY as the Data Type, and then click OK.
5. Type 00000000000000000300000000005BE000005CE000000000 in the Data field, and then click OK.
6. Close the Registry Editor and restart the computer
Change Internet Explorer Title
With this tweak you can customize Internet Explorer by adding your own window title.
1. Open regedit.
2. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main.
3. On the right pane, create or modify the string value name “Window Title”.
4. Double click “Window Title” and enter the text desired In Title Bar.
5. Close regedit
Change Internet Explorer Title
With this tweak you can customize Internet Explorer by adding your own window title.
1. Open regedit.
2. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main.
3. On the right pane, create or modify the string value name “Window Title”.
4. Double click “Window Title” and enter the text desired In Title Bar.
5. Close regedit

About Me

I am Deepak Kumar Verma.I living in Khajuwala Bikaner(India).I am a Computer hardware & Networking Engineer.

Call- +919982806397

+919928882791

E-mail-"deepu_verma2009@live.com"