How I Know System Mainboard / Motherboard Model Number In Windows Xp / Vista

How I Know System Mainboard / Motherboard Model Number In Windows Xp / Vista
It is Very Easy............................................................

For View Motherboard Model Number Download This Software
Networking Solution  By Deepak Verma 9214012330 

Deepak Kumar Verma

Can not open Internet Download File without Save

When you Download A .RAR or .ZIP file And You Choose "OPEN" Options (When Downloading Windows Open) Not "Save" Options................

After Complete Downloading A File You Get Error A Error

"Cannot Open File C:\Document And Setting\..................\Internet Temp. File\............ .ZIP or .RAR Files

When You Get Error Then DELETE All INTERNET TEMP FIles Using INTERNET OPTIONS or A TOOL

AND Dowload Now And Open File WIthout Save On DISK....

Deepak Kumar Verma 9214012330

the computer may reboot continuously when you try to start Windows Millennium Edition (Me) or Windows 98.

If your computer has more than 1.5 gigabytes (GB) of memory (RAM), the computer may reboot continuously when you try to start Windows Millennium Edition (Me) or Windows 98.




Or, when you try to install Windows Me or Windows 98 with more than 1.5 GB of RAM installed, Setup may stop responding (hang) or reboot continuously
 
 
 
 
 
To work around this issue, add the following line to the [386enh] section of the System.ini file:


MaxPhysPage=40000

This limits the amount of physical RAM that Windows can access to 1 GB. To add this line, use the following steps:

Use any text editor (such as Notepad) to open the System.ini file in the Windows folder.

Add the following line in the [386Enh] section of the file:

MaxPhysPage=40000

Save the file, and then restart your computer.
 
More Information Is HERE
 
Deepak Kumar Verma 9214012330

PC Does Not Show 4 GB Ram In Windows XP

We are Know That By Default 32 - Bit Windows Xp Supports Only 2 GB Ram And 64 - Bit OS is Supports 4 Gb Ram.

But 32 - Bit OS Can Support Up to 4 GB Of Ram

But How ......... ?????????    I tell You About It

Open BOOT.INI File From Your Pc In Notepad
and Edit It As Well As

 After /FASTDETECT 
Add A New Word As Well AS

/PAE

Save It And RESTART Your System

((((((((((((((()))))))))))))))))))))))))))))))

IF You Using VISTA  Os Then

Open CMD
and Type Here

"BCDEDIT / set PAE forceenable  "  And Press Enter
Restart Your System

System Hang Or Slow Processing During Complete Start Windows XP

While System Booting and After Show Desktop System Hang Or System Slow............

Frist Of all UNINSTALL ANTIVIRUS From Your System

Check Space In C: DRIVE

Use Recovery Consol With CHKDSK /R Command

Disk DEFRAGMENT Now

And Best Of  Luck
Deepak Kumar Verma 9214012330

Lan Network Fail After Same TIme

आज एक अजीब प्रकार की समस्या का सामना करना पडा .......................................

Lan Networking Fail After Same Time............................
After Four 4 hrs, I am Test a Networking Switch is Heat and It Is Drop Lan Networking ( Wan Is Running SucessFully)

Now I Change Switch and Test Again and I am Success

So If You  Have same Problem Then Frist of all Check Networking Switches and Cable Connecter..
Deepak KUmar Verma 9214012330

E-mail ID Does Not Save In IE ....

If u wanna that Your Internet Explorer Has Remember Your ID (Not a Password)
Then Goes These Step and Get Funny Tricks

Open "INTERNET EXPLORER"  and Press Now "ALT + T " and Now Press "O" Key from your Keyboard

Now Click On "CONTENT" Tab Menu

Now Click On "SETTING" Button Under the "AUTO COMPLETE"  Menu

Check Mark All Options and Click On "OK" , "Apply"
Now Restart IE
Deepak Kumar Verma

How We Block Internet In IE or Other Exolorer

We Can Block Internet To Open

How ??

Go >> Control Panel >> Internet Option >> Click on Connection Tab >>  Click On Lan Setting >>>

Now Fill same Option as Well As
Under the Proxy Server Setting
Proxy IP 0.0.0.0
and Port No. 80
Now Save all Setting , Close All Open Windows  and RESTART Personal Computer
दीपक कुमार वर्मा +919214012330

Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

Reboot in safe mode


2. Open device manager

3. Go under system devices

4. Disable (DO NOT UNINSTALL) the Microsoft UAA driver.

5. Reboot in safe mode (This is so that driver will not load)

6. Open device manager

7. Go under system devices

8. Now... uninstall the Microsoft UAA driver. This will also remove the Realtek.

9. Reboot to Windows XP or Vista.

10. Install the Realtek drivers without letting windows install it.



or try this

1. Disable audio controller in normal windows mode

2. Reboot in safe mode

3. Go to device manager

4.Uninstall

5.Now System Reboot in Normal Mode and Install Driver Again

6. And Get Enjoy with System Sound and Heare Sound

Deepak Kumar Verma

Lan Workgroup Pc Not Showing In Workgroup But Lan Pc Open By Its IP Address and Wan Working Proper In Windows XP.

Hi Friends,
You are Working on Lan and You see that Lan PC Not Showing in Workgroup but Lan Pcs PING sucessfully by one by one pc
 Open By IP Address.........................  But Problem In Workgroup Only

Then your Problem Soluction Is here

Frist off All RESTART of Your Lan Switch and Router


Deepak Kumar Verma 9214912339

INVALID LBAI ERROR WITH WinXP WHILE BOOTING

This error message will display if your hard drive has gone faulty and lost it's master boot record (MBR). To resolve this issue you need to perform an MBR repair by following below steps:
1. insert your windows installation disk,then reboot and press R to repair a Windows XP installation when prompted for.
2. If repairing a host with multiple OS, select the appropriate one (XP) from the menu. If you have only one operating system, enter 1 to select it.
3. Enter the administrator password if prompted.
4. Now you will be on c:\Windows> apply FIXMBR command and hitEnter to fix the MBR.
(U will be presented with several scary warning lines. Microsoft is exceptionally vague regarding the conditions under which fixmbr can cause problems although they are clear about the consequences (losing all data on the hard drive), so use this at your own risk)
5. Type Y and ENTER and Type exit to leave the recovery console and reboot.

Cannot See Hibernation Option, After Enable Hibernation

GO in  power options Searching in Start Menu Search Options.
Now Open Power Option and power settings opened Click Change plan settings
It will open Edit Plan Settings window, Click Change advanced power settings

Now under power options window, Open Sleep >> Allow hybrid sleep – toggle it to off and click OK
Now You Can test Or Windows Options....


Deepak Kumar Verma 9214012330

Slow Internet connection

1. Click Start Menu
2. Open Control Panel>>Network Connections
3. Right click on your Local Area Connection and click on Properties

4. Now on the General tab and uncheck all the checkboxes of all the protocols except tcp/ip.
5. Press OK.

Add Password To Word 2010 Document

Open the word document or create a new one, now click File >> Save As option to save that document, this will open a new dialog box which ask you to give the name to this document.


Now, under this dialog click General Options from the drop down option menu


Now enter the password to document, with which it will protected, you can also make this document as read only as shown, this way it can be read but cannot be edited


Deepak Kumar Verma +9214012330

Recovering permanently deleted text in Microsoft Word 2003

1. First, run Microsoft Word to get a blank document.
2. Navigate to Tools -> Options.
3. In the Options dialog, click on the General tab.
4. Under the heading General Options, select the check-box right next to Confirm conversion at Open.
5. Click on OK.

And Test Now

1. Open the file in which you had deleted the text permanently.
2. You will get a prompt of Convert File containing a list of options. Select the option for Recover Text from Any File, and click OK.
3. At first, the document that is opened will seem to be entirely junk, with a lot of typographic symbols, strange characters, and the like. However, in their midst, if you scan the document thoroughly, you will find your deleted text. All you have to do is copy this portion of text and then paste it in your original document

Deepak Kumar Verma 9214012330

Enable Run Command In Start Menu In Windows 7

Right-click an open area in Start Menu,
Go to Properties -> Start Menu -> Customize and 
Check “Run Command”. Now you should be done.
Click on Apply or OK


Deepak Kumar Verma 9214012330