Search This Blog

Friday, May 28, 2010

Laptop Battery Not Charging

Solution 1.

Laptop Battery Not Charging Because Of Heating Issue

So Check Heating of Laptop. 

Solution2. 
                        Wrong Driver Install 
    
 AS Like As " Microsoft ACPI-Compliant Control Method Battery"
Uninstall it and Restart your Laptop 


Your Problem Soutout Now  

0x0000008e error while startup Windows XP and Restore System

It is a Blue Screen Error
First of All Restart Your System While Error Show 


Method 1.  Update Your Windows And System Driver 


Method 2. Restore Your System On Early Date. and Now Back Restore On Undo Last Restore Point ............


And Get Enjoy OF  Summer Holidays ..............


How We Restore System 
To use System Restore to restore Windows XP to a previous state, follow these steps:


  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in theOn this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Completepage is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.





How to undo a system restoration after you perform a System Restore

You may have unintentionally restored Windows XP to a previous configuration that you do not want. To undo the restoration, follow these steps:

  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Undo my last restoration, and then click Next

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  4. On the Confirm Restoration Undo page, click Next. System Restore restores the original Windows XP configuration, and then restarts the computer.
  5. Log on to the computer as Administrator. The System Restore Undo Complete page appears.
  6. Click OK. You can now run System Restore again from a different restore point.



Thanks For Microsoft Solution Point "kb/306084 " For System Restore

Deepak Kumar Verma

Choose your Action When You Press Power Button on Your Computer

How You Set Power Button Setting On Your Computer

Whats Happen While You Press Power Button On your Keyboard

Ask Me What you Do................

DO Nothing...................

Hibernate.............

Stand By...........
or
Shutdown.........

For More Help I tell That The Best Option is "ASK ME WHAT YOU Do "

Deepak Kumar Verma ....

Friday, May 21, 2010

You can add multiple IP Addresses to a single interface card.

You can add multiple IP Addresses to a single interface card.



1. Open Control Panel and Network Connections.
2. Right-click the LAN connection and select properties.
3. Select Internet Protocol (TCP/IP) and click properties

4. Select "Use the following IP Address" and enter the primary IP Address, Subnet mask and Gateway and the primary and secondary DNS Servers


5. Click Advanced then Add under IP Addresses.
6. Add the IP Address and Subnet mask. Repeat the procedure if there are additional IP Addresses to be added.

7. Click Add under "Default Gateways" and add the gateway addresses
8.Click OK then OK and then OK to save the changes.
9. To confirm the multiple IP Addresses are set, from the command prompt (Start-Run and type CMD) run the ipconfig command. You can see multiple IP addresses on one Network Interface Card.

Deepak Kumar Verma 9214012330

WHEN INSERT DVD / CD SYSTEM HANG OR NOT RESPONDING

WHEN INSERT  DVD / CD SYSTEM HANG OR NOT RESPONDING 

1. plz check system to DVD data bus
2. If not success then 90% problem related to SMPS
3. At last check DVD writer ...........................


Deepak Kumar Verma    

Wednesday, May 19, 2010

HOW I KNOW THAT YOUR MAINBOARD SUPPORT RAID DISK OR NOT

HOW YOU KNOW THAT YOUR BOARD SUPPORT RAID DISK DRIVER OR NOT


1. READ THE COMPANY MANUAL AND ONLINE HELP PAGE.....

2. OPEN THE "DEVICE MANAGER"
3. AND CLICK ON "+" 'IDE ATA/ATAPI CONTROLLERS'
4. CKACK HERE CONTROLLER TYPE
5. IF YOU FIND "R" WORD AT LAST OF THE CONTROLLER NAME
THEN IT IS SUPPORT OF RAID DISK DRIVER OR NOT.................

DEEPAK KUMAR VERMA

Thursday, May 13, 2010

Compaq Presario cq 40 Windows Installing Error

You Are Trying to Install Windows Xp2 / XP3 / Vista / Windows 7 But You Are Not Success

I tell You How You Become Success...........

When You Installing Xp2......
While Installing Get Error     "0x0000007b (0xbacc3524, 0xc0000034, 0x000000000, 0x00000000)"

Means SATA Driver Not In XP2

Then You Try With WINDOWS XP3


When You Installing Windows 7

And System Hang On "COMPLETE INSTALLING"

First of all You CHANGE WINDOWS 7 DVD
IF Not
Then REMOVE WIFI CARD  From Your SYSTEM
Remove All USB Parts
Now Try to Install
I am Sure That You Are Success In It................

Deepak Kumar Verma

Wednesday, May 12, 2010

Network ID Disable In Windows Xp / Vista

Network ID Disable and Member Of Options Is Disable.......................................

You are Not able to Change WORKGROUP Name or DOMAIN Name..............

Then .........

Install "Microsoft Net Client" Protocol In Local Area Connecion Setting Or Cheak Mark It......

Go to "Local Area Connecion Properties" and Now Click On "INSTALL"
Now Choose "CLIENT"
and Now Select "Microsoft Net Client"  Now Install it And RESTART Your Sytserm............

Deepak Kumar Verma

HOW I KNOW SYSTEM UP TIME AND OS INSTALL DATE

HOW I KNOW SYSTEM UP TIME AND OS INSTALL DATE

Go in RUN and Type Here  "CMD /K SYSTEMINFO.EXE" And Wait For Result 
Now See In It As wall as ---


Now You Know About All Informations 


System UP Date 


Original Install Date 


Deepak Kumar Verma 9214012330 

Tuesday, May 11, 2010

Make over 1000 folders in few seconds

Make over 1000  folders in few seconds


Open NOTEPAD software 
Copy code Below!
-------------------------------------------------


@ echo off


T ital www.deepuinfo.blogspot.com


:top

md %random%


goto top



--------------------
Save it
give name DEEPAK.Bat
now Click on it
Deepak Kumar Verma

Monday, May 10, 2010

Computer Not accessible.

Computer Not accessible.

This problem occurs only form time to time. We  solved this problem by re-starting the computer. After re-start this problem is solved.................


I tell Solution 


GO n RUN And Type Here net config server /autodisconnect:1" 

And Click On OK



If You Have A Software 


Then Download My Software "Windows Master Tool" For Link Click On SOFTWARE  Page 
DeepakKumar Verma

Any Websites not opening

Scan Your System With A Update Antivirus or A Trojan Killer Software

Now Go TO 


C:\WINDOWS\system32\drivers\etc


And Open A HOST File In Notepad Software 


Delete all the contents of this file and type the line below



127.0.0.1   localhost
Save file and Restart Your System Now 


Deepak Kumar Verma