When we are working on LAN then many time get to ping systems to each other
1. Use Same Class IP address, Subnet mask,default Gateway and Work-group Name
2. Check Your LAN Card Setting as Speed, Duplex, Drivers Etc.
3. Check Your Computer Name ( Maximum name length15 characters)
4. Install NetBios and IPX Protocol
5. Check Your Firewall Setting ( Check for blocking 137 UDP Port )
6. Desiable ICF Services
7. Enable Allow Incoming Echo Request ( Open Firewall and Click On Advanced and Check in ICMP Setting )
8. Check Ping Command With Computer Name ( If you Success then Install NetBios Protocol or Restart )
9. Clear System ARP
10. Desiable Filtering IP Address and Click On Prompt All
More Solution In Next Post
DEEPAK KUMAR VERMA CALL 9214012330 MAIL - deepuverma@engineer.com
1. Use Same Class IP address, Subnet mask,default Gateway and Work-group Name
2. Check Your LAN Card Setting as Speed, Duplex, Drivers Etc.
3. Check Your Computer Name ( Maximum name length15 characters)
4. Install NetBios and IPX Protocol
5. Check Your Firewall Setting ( Check for blocking 137 UDP Port )
6. Desiable ICF Services
7. Enable Allow Incoming Echo Request ( Open Firewall and Click On Advanced and Check in ICMP Setting )
8. Check Ping Command With Computer Name ( If you Success then Install NetBios Protocol or Restart )
9. Clear System ARP
10. Desiable Filtering IP Address and Click On Prompt All
More Solution In Next Post
DEEPAK KUMAR VERMA CALL 9214012330 MAIL - deepuverma@engineer.com
